Hydrogel molds fabrication and using in microfluidic devices fabrication

Research Background and Objectives :

- Hydrogel mold fabrication using simple process

- Using fabricated hydrogel mold as a mold master for PDMS casting process

Figure 1. Hydrogel mold fabrication process

Figure 2. Fabricated hydrogel mold as the mold master and fabricated PDMS channel

Figure 3. Using these PDMS channel to prepare fluidic devices and fluidic tests

Figure 4. Using these PDMS devices as fluidic synthetic devices for hydrogel and Janus particles fabrication.

Figure 5. Fabricated hydrogel and Janus particles

MicroSystems &


Laboratory at KNU

Eng. Build  3- 315  School of Mechanical Engineering KyungpookNational Univ.  Daehakro 80, Buk-gu, Daegu 41566, Korea   Tel: +82-53-953-1574   Fax: +82-53-950-6550 

© 2017 by Lee Hanbyul. Proudly created with Wix.com